User Manual

8
Remove any discoloration from the weld areas.
9
Bake the structural adhesive so that the bonded panels reach a
temperature of 60°C–80°C (140°F–176°F) for at least 30 minutes to
achieve full strength.
WARNING: Do not allow the High Voltage Battery to reach a
temperature above 74°C (165°F). Heating the High Voltage Battery
above 74°C (165°F) for an extended period could result in injury to
personnel and/or damage to the battery.
Front Frame Rail Inner (Small Front Section)
Replacement
TESLA BODY REPAIR MANUAL
For feedback on the accuracy of this document, email [e-mail].
Updated: 11MAY18 38