User Manual

7
Install the new Front Inner Front Subframe Bracket (continued).
K
Perform resistance spot welding.
Installation Spot Weld (x4)
WARNING: Failure to follow all welding safety precautions, including
the use of personal protective equipment, could result in serious
injury or property damage. Only technicians who have successfully
met Tesla’s requirements for welding training are authorized to weld
structural components on Tesla vehicles.
CAUTION: Do not weld on a Tesla vehicle with an energized high
voltage or 12V system. Welding on a Tesla vehicle with an energized
high voltage or 12V system might damage vehicle components.
CAUTION: Use only insulated clamps within 200 mm (8 in) of
resistance spot weld locations. Do not perform resistance spot
welding when there is an uninsulated clamp within 200 mm (8 in) of
the spot weld location.
Front Frame Rail Inner (Small Front Section)
Replacement
TESLA BODY REPAIR MANUAL
For feedback on the accuracy of this document, email [e-mail].
Updated: 11MAY18 37