User Manual

1
Prepare the new Front Frame Rail Inner section for installation.
A
Mark a cut line 75 mm (3-15/16 in) from the middle of the location
hole shown on the first new Front Frame Rail Inner.
Cut Line
B
Cut the new component on the cut line marked in the previous
substep.
NOTE: Leave 2 - 3 mm (3/32 - 1/8 in) of extra material to be
trimmed at a later step.
Front Frame Rail Inner (Large Front Section)
Replacement
TESLA BODY REPAIR MANUAL
For feedback on the accuracy of this document, email [e-mail].
Updated: 11MAY18 9