User Manual

Rev. 1.0 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 18
Other regions rules allow radio certification labeling to appear in the user manual and on the
outside of the host product. The Integrator must ensure the host product and user manual
includes all required regulatory labeling (including radio certification numbers and logos for all
target countries). The system integrator is responsible to confirm the final regulatory label
contains all required certification IDs for all countries in which the system will be marketed or
sold.
Tesla Motors, Inc. provides sample artwork with the applicable certification numbers available
for the Module. The provided .PDF document can be opened using Adobe Illustrator so the
sample artwork can be copied and modified as needed. Therefore the final label produced by
the Module manufacturer will vary from this sample. However, the logos and certification
numbers must be those shown in the sample global label.
NOTE: These instructions refer to regulatory labeling to be affixed to the outside of the host product –
not on the SiP itself. The FCC requires the FCCID on the outside of the host product.
11.3 Instructions to download the sample global label
artwork with certification IDs
1.
Send request to [e-mail]