User Manual

Required Labeling on the Outside of the

Host Device

NOTE:

Explanatory text in red font must not be included in the final label.

10.1

FCC

The FCC requires a label on the outside of the host system visible to the end user.

Example wording is:

(Replace X’s with actual IDs found in section 2).

The FCC requires a logo signifying emissions compliance on the outside of the host system.

Additional options are available for placement of the FCC label on the host. Please refer to the

FCC Knowledge Database KDB784748 found at

https://apps.fcc.gov/oetcf/kdb/index.cfm.

NOTE:

The Integrator is responsible to perform FCC Part 15 Class B digital emissions testing on the end

system with the radio Module installed. The FCC logo below should not be affixed unless the

OEM integrator has obtained the necessary Part 15 approval, e.g., self-declaration of conformity.

If the host sys em is approved to FCC Class B digital emissions limits under a grant of

certification issued by a TCB, the FCC ID number shown on the grant should be used on the label

instead of the FCC logo below.

10.2

Taiwan NCC

Taiwan NCC requires a label on the outside of the host system visible to the end user.

The required wording is:

(Replace X’s with actual IDs found in section 1 ).

Rev.

1.0

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 15

Contains:

FCC ID: XXX-XXXXXXX

IC: XXXXX-XXXXXX

本產

品內

含射頻模組

XXXXXXXX