Certifications 2

Page 5/11
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 13.03.2019 Revision: 13.03.2019Version number 195
Trade name tesa 60020 60021 Spray Glue PERMANENT
(Contd. of page 4)
48.1.33
Instantly remove any contaminated garments.
Wash hands before breaks and at the end of the work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
·
Breathing equipment:
Use breathing filter A2
In case of short term exposure use respiratory protection. In case of
intensive or longer exposure use respiratory protection equipment
independent from ambient air.
·
Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/
the substance/ the preparation.
Selection of the glove material on consideration of the penetration
times, rates of diffusion and the degradation
·
Material of gloves
use solvent stable gloves.
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the
protective gloves and has to be observed.
·
Eye protection:
Safety glasses
·
Body protection:
Protective work clothing.
*
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Aerosol
Colour:
Light yellow
·
Smell:
Solvent-like
·
Odour threshold:
Not determined.
·
pH-value:
Not determined.
·
Change in condition
Melting point/freezing point:
Not determined
Initial boiling point and boiling range:
-44 °C (Propan)
·
Flash point:
<-19 °C
·
Inflammability (solid, gaseous)
Not applicable.
·
Ignition temperature:
245 °C
·
Decomposition temperature:
Not determined.
·
Self-inflammability:
Product is not selfigniting.
·
Explosive properties:
Not determined.
·
Critical values for explosion:
Lower:
1 Vol %
Upper:
10.9 Vol %
·
Steam pressure at 20 °C:
8,300 hPa
·
Density
Not determined
·
Relative density
Not determined.
·
Vapour density
Not determined.
·
Evaporation rate
Not applicable.
(Contd. on page 6)
GB