Datasheet

productinformation
Page 1 of 1 - As of 22/02/2018 - en
For latest information on this product please visit http://l.tesa.com/?ip=51618
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical
information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered
as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not
limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa®
product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be
glad to support you.
tesa® 51618
PET fleece tape for flexibility and noise damping
tesa® 51618 is a PET fleece wire harness tape with a rubber based adhesive.
Major Features:
▪ Noise damping
▪ Abrasion resistant
▪ Handtearable
Color: Black
Main Application
tesa® 51618 is designed for the passenger compartment, providing flexibility and noise damping.
Technical Data
▪ Backing material PET fleece
▪ Total thickness 250 µm
▪ Type of adhesive rubber based
▪ Adhesion to steel 3 N/cm
▪ Elongation at break 20 %
▪ Tensile strength 37 N/cm
▪ Temperature resistance min. -40 °C
▪ Temperature resistance (3000h) 105 °C
▪ Abrasion resistance (10mm
mandrel)
Class B (acc. to
LV312)
▪ Abrasion resistance (5mm
mandrel)
Class A (acc. to
LV312)
▪ Flame resistance as composite Class B (acc. to
LV312)
▪ Unwind force (roll width ≤ 9mm) 4.6 N/roll (30 m/min)
▪ Unwind force (roll width > 9mm) 9 N/roll (30 m/min)
▪ Noise damping (decibel) Class C (acc. to
LV312)
Additional Information
Standard widths: 9, 19, 25, 32 mm
Standard lengths: 15, 25 m
▪ Most combinations of width and length are possible
▪ Further dimensions are available upon request
▪ Standard core diameter: 38 mm