Configuring the for
Driver version: 5.00.2000 Build 112 ControlPanel version: 1.03.25 Build 112 Sonar version: 1.0 Date: Aug. 6th 2001 Integration: Sonar is a new audio and MIDI sequencer from the makers of Cakewalk ( Twelve Tone Systems®). Different from sequencers like Steinberg’s Cubase or Emagic’s Logic, Sonar doesn’t use the well known ASIO standard to achieve a low latency.
After the hardware analysis you have to select the input and output devices in the menu Options \ Audio Options -> Drivers. Optimizing: To optimize the latency we recommend the following configuration steps: 1. Stop the audio engine with the appropriate button in Sonar 2. In the EWS 88 (EWX 24/96) ControlPanel you can set a shorter DMA Buffer Latency time. Pay attention that on cascaded systems with more than one card each card is set configured separately. 3.
Using the Buffer Size controller you can adjust the latency. Additionally using a smaller value in the field “Buffers in Playback Queue” will further optimize the latency time. 4. If you hear clicking, drop-outs or if the sound completely cuts out when using Sonar then set the changed values from points 2 and 3 back to their original values and/or adjust them in smaller steps to determine the correct settings for your PC.