Specifications
38
39
Deutsch
English
Component output
Connect a component cable (red, green, blue) to the component input of your TV set and
the component output of the M740 according to the colors (see graphic). The component
cable provides a video signal only; therefore, if you have selected this type of connection,
you have to route a separate audio cable to your TV set or amplier.
The following options for sound output are available:
Connect the stereo outputs (red, white) of the A/V Out jacks to the A/V In of your TV •
set/audio device.
Connect the S/PDIF (optical) output of the M740 to the S/PDIF IN of your TV set/•
audio device. (TOSLINK bre-optic cable)
Connect the S/PDIF (coaxial) output of the M740 to the S/PDIF IN of your TV set/•
audio device. (Orange cinch/RCA plug)
HDMI output
Connect an HDMI cable to the HDMI input of your TV set and the HDMI output of the
M740 (see graphic). This connection gives you maximum audio and video quality…
sometimes less is more!
Making the analog connection
Then connect your M740 via the composite video output (yellow cinch/RCA jack). Now,
if you switch on your M740, you should see a picture on your television, but…before you
start to panic, thinking you suddenly lost your hearing or that your M740 is defective…
you are not deaf, and there is almost certainly nothing wrong with your M740. This jack
provides a video signal only. We will have to get the sound elsewhere. Keep reading!
Analog stereo audio output
Using a cinch (RCA) cable with 2 connectors on both sides (usually red and black), con-
nect your NOXON M740 to your amplier, TV set, AV receiver or similar device. Note that
using this connection, you will really hear only classic left/right stereo sound. You will not
get the “a helicopter is ying right through my living room” effect with this connection.
Making a separate digital sound connection
Connect the S/PDIF (optical) output of the M740 to the S/PDIF IN of your TV set/audio
device. If you use a bre optic cable (not included), connect the TOSLINK connector of
the cable to the optical connection of the M740 (see graphic). Plug the other connector of
your bre optic cable into a digital audio device, such as an amplier or AV receiver (not
included in the scope of delivery).
Connection to external storage media
With its three high-speed USB connections, the NOXON M740 gives you the ability to
connect multiple data carriers at the same time and even copy media between them!