Operation Manual
NOXON
can't be played back, your device will automatically attempt to rees-
tablish the Internet connection for a minute, and if it can't it will revert
to the default alarm sound. So you won't be allowed to oversleep.
In the next step, set your preferred alarm clock volume with the
Up/Down buttons. This setting is particularly useful if you have used
the sleep timer function to rock you gently to sleep the night before—
because the volume of the alarm clock can be set entirely independ-
ently, you don't need to worry your sleepy head about the volume of
the NOXON in normal operation—it will wake you up with the volume
you set here.
Press the Right button to confirm and your alarm clock is ready.
The displays in the main menu and the Alarm Clock menu now show
the alarm readiness based on the time(s) set, and a small bell appears
in the clock display for each active wake-up time. These can be
viewed with the
button.
Setting maximum alarm and snooze durations
To configure the maximum total duration for your morning wake-up
call, or the duration between wake-up calls (snooze function) before
the alarm function is finally deactivated, select the “Alarm Settings”
menu item. You can now make your personal settings here.
Switching the alarm clock on and off
To switch the alarm(s) on and off without having to reset all the items
described above, simply select “ON/OFF” in the Alarm Clock menu.
Now you have the option to enable or disable the alarms, either all at
the same time or individually, without having to go through the com-
plete set up procedure described above.
When the alarm clock goes off… deactivating and alarm repeat
As soon as the alarm clock is activated, the NOXON switches from its
previous state to Alarm mode, which looks something like the illustra-
tion on the left. Depending on the setting in the configuration menu
and your firmware version, the wake-up screen appears either in full
brightness or somewhat dimmed (refer to page 25). You now have two
choices: get up or go back to sleep! The alarm clock is only deacti-
vated with the Stop button. Pressing any of the other buttons on the
device will return the NOXON to the land of dreams again as well,
though the alarm display will remain active until you definitively deac-
tivate the alarm clock.
Until then, the alarm clock will make its presence known repeatedly at
the preset snooze intervals.
38 ENGLISH










