Operation Manual

NOXON
ENGLISH 29
8.3 Playback from your iPod
In order to use your iPod with the NOXON, please carry out the instruc-
tions on p. 12 first as preparation. As soon as an iPod insert has been
inserted in the recess on the top of the device, you can start. Simply
engage the iPod
9
(it must be firmly seated and contact the connector
properly)—this can be done while it is switched on or off—and if the
NOXON is switched on, a new item appears immediately in the main
menu (
) with the name of your iPod. On the iPod display itself, a
check should appear, confirming that the iPod and the NOXON have now been connected. Incidentally, while
the iPod is connected to your NOXON, you can't use the iPod controls directly any more, and you don't need
to—that would also be much too complicated with the remote! Just use the remote control instead, or the
buttons on the NOXON in the same way you've learned from other areas of the NOXON menus. Pressing the
Right button takes you from the main menu to the view of your iPod contents, which may be displayed
slightly differently depending on your model and the way you have set it up. You can now call your audio
contents directly from the iPod presorted by artist, by type of music or other criteria for example, and play
them back through the connected loudspeakers or headphones.
If you are not using your iPod at any particular time, it will also be charged automatically. So you can happily
keep your cherished iPod permanently perched on the NOXON, so that it will always be ready for use on the
move or present and ready for local playback via the NOXON! Even when the NOXON itself is not switched
on, you can always count on a fully charged power supply—and you can see this because the check mark
should still appear in the iPod display even when the NOXON is switched off.
9 You can see a list of all the models that are supported online at www.terratec.com.