Operating Instructions and Installation Instructions

8 Cinergy HT express Hardware (English)
Installing the drivers in Windows XP (Service Pack 2 or higher)
Once you have connected the Cinergy HT Express to the ExpressCard Slot of your computer,
Windows will display a message bubble in the taskbar to indicate that Windows has found
new hardware—Cinergy HT Express. The Windows setup wizard will now appear.
Insert the TerraTec Cinergy HT Express installation & software CD-ROM into your CD-ROM drive.
When the dialog asks if you want to establish a connection to Windows Update, select “No,
not this time”. In the next step, select “Install the software automatically (recommended)” and
click “Next” to install the drivers.
Once the setup wizard has found the drivers on the installation & software CD-ROM, Windows
might display a message indicating that the drivers have not passed the Windows logo test. It
is safe to ignore this information and continue the installation by clicking “Continue anyway”.
Click “Finish” to complete the installation once the driver files have been copied.
Windows will now display another message bubble to indicate that the Cinergy HT Express has
been installed successfully.
The installation was completed successfully.
To be sure, open the Device Manager (Start Æ Control Panel Æ System Æ Hardware tab Æ
Device Manager) and expand the “Sound, video and game controllers” entry. If the “Cinergy
HT Express” is not marked with a yellow exclamation point, then the installation was success-
ful.