User's Guide Part 2

6/25/2003 ©2003 TerraDigital Systems, LLC
69
DRAF
T
12. Select the Base Transceiver configuration and click Next (Ethernet only)
If you are installing the TerraPlayer system on a network via Ethernet, you will be
prompted to configure network parameters.
The Default is U
se DHCP (recommended). If you choose not to use DHCP, you will
need to manually configure the Address, Mask, and Gateway parameters in the window.
Use the default and click on Next>.
13. Configure the Share Access Parameters
The Share Access Parameters define the User name and Password used by the
TerraPlayer when accessing Shared folders on the computer(s).
Use the default and click on Next>.