User's Guide Part 1

Table Of Contents

DRAF

AM/FM Radio (TR-100 only)

AM/FM Radio Tuner

The TerraPlayer TR-100 Table Receiver comes with a built-in AM/FM radio tuner. To

select stations on the tuner, tap on

AM or FM to select a band, then use your finger to drag

the tuner dial left or right to the desired frequency.

1. Press the Tune button

This will access the AM/FM tuner.

2. Press the AM or FM button

Select the AM or FM button to select the desired frequency band.

3. Scroll the tuner to the desired frequency

The tuner acts very much like a tuner on an old-style car radio. Press AM or FM to select

the band, then touch the tuner and drag it back and forth to find the frequency band of the

radio station you wish to add.

If you press the AUTO SCAN button, the TerraPlayer will scan the airwaves for radio

stations.

4. Press the DONE button to close the tuner

Press the DONE button to close tuner and listen to the station, or CANCEL shut off the

radio.

Adding radio stations with Auto Scan

If you press the AUTO SCAN button, the TerraPlayer Radio will scan the radio waves at

set up icons for all radio stations that it can detect. This is also done automatically by the

TerraPlayer Radio is first plugged in.