Certifications 2

ManualsBrandsTeroson ManualsAdhesives, Tape & Hook-and-Loop FastenersTeroson MS 931 Sealant 2469968 290 ml

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 7

TEROSON MS 931 WH

SDS No. : 75711

V005.5

Revision: 18.06.2015

printing date: 19.02.2016

Replaces version from: 11.04.2015

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

TEROSON MS 931 WH

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Sealant

1.3. Details of the supplier of the safety data sheet

Henkel Ltd

Wood Lane End

HP2 4RQ

Hemel Hempstead

Great Britain

Phone:

+44 1442 278000

Fax-no.:

+44 1442 278071

ua-productsafety.uk@uk.henkel.com

1.4. Emergency telephone number

24 Hours Emergency Tel: +44 (0)1442 278497

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.2. Label elements

Label elements (CLP):

The substance or mixture is not hazardous according to Regulation (EC) No 1272/2008 (CLP).

2.3. Other hazards

None if used properly.

Summary of content (7 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 7 SDS No. : 75711 V005.5 Revision: 18.06.2015 printing date: 19.02.2016 Replaces version from: 11.04.2015 TEROSON MS 931 WH SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier TEROSON MS 931 WH 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Sealant 1.3.
PAGE 2
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: 1-Component moisture-curing sealant Base substances of preparation: Silane-modified polyether Declaration of the ingredients according to CLP (EC) No 1272/2008: Contains no dangerous substances exceeding the limits of the EU-Regulation SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Move to fresh air, consult doctor if complaint persists.
PAGE 3
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH Page 3 of 7 6.3. Methods and material for containment and cleaning up Remove mechanically. Dispose of contaminated material as waste according to Section 13. 6.4. Reference to other sections See advice in section 8 SECTION 7: Handling and storage 7.1. Precautions for safe handling Hygiene measures: Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work. 7.2.
PAGE 4
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH Page 4 of 7 Biological Exposure Indices: None 8.2. Exposure controls: Engineering controls: Ensure good ventilation/extraction. Respiratory protection: Suitable breathing mask when there is inadequate ventilation. Hand protection: Chemical-resistant protective gloves (EN 374).
PAGE 5
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH 9.2. Other information No data available / Not applicable SECTION 10: Stability and reactivity 10.1. Reactivity None if used for intended purpose. 10.2. Chemical stability Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid None if used for intended purpose. 10.5. Incompatible materials None if used properly. 10.6.
PAGE 6
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH Page 6 of 7 SECTION 13: Disposal considerations 13.1. Waste treatment methods Product disposal: In consultation with the responsible local authority, must be subjected to special treatment. Waste code The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users.
PAGE 7
MSDS-No.: 75711 V005.5 TEROSON MS 931 WH Page 7 of 7 SECTION 16: Other information Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.