Operation Manual

 ENGLISH
CLEANING
Always unplug the iron from the outlet and wait for the appliance
to completely cool down before starting any cleaning
operations.
Use a normal damp sponge to clean the aluminium soleplate, or else
a non-metallic kitchen scouring-pad for difficult stains.
Use a damp cloth to clean the rest of the iron and the boiler shell only.
Never immerse the appliance or parts of it into water or other liquid, do
not use steam, chemical or abrasive substances.
constant temperature.
• When you have finished ironing, put switch (2) to position “0” to turn
off the appliance. Let the iron cool down.
TABELLA DA CONSULTARE IN CASO DI ANOMALIE
TABLE TO BE USED IN CASE OF ANOMALIES
In case of anomalies, see the table below before calling the Service
Centre.
The appliance is not working
Make sure the power cord is plugged into
the outlet.
Make sure there are no problems with
the mains.
The iron soleplate does not heat
Make sure you turned the temperature
control knob on the iron
The appliance is connected to the
mains and stops working
Call the Service Centre
The appliance is connected to the
mains and the switch is put to position
“1”, but the appliance does not work
Call the Service Centre
The appliance is on but it does not work
Call the Service Centre
PROBLEMS
SOLUTIONS
Termozeta S.p.A. reserves the right to introduce technical and/or aesthetic changes to
its products intended to improve performances.
Termozeta is an international trademark. Copyright © 1995. All rights reserved.
Termozeta S.p.A. - Via Magenta, 41/43 - 20010 Bareggio (MI) Italy
www.termozeta.com