Operation Manual

 ENGLISH
NO MORE WATER DURING USE
• The jet of steam decreases and finally disappears if there is no more
water in the boiler.
• Carefully follow the instructions given below to fill up the boiler
again:
- press button (16) on the iron, until no more steam is being produced;
- turn the appliance off by pressing the proper push button (3);
- unplug the appliance from the outlet;
- slowly unscrew the boiler cap being careful of any eventual residual
steam;
- fill up the boiler following the instructions given in the “HOW TO FILL
THE BOILER WITH WATER” paragraph;
- switch on the appliance again following the instructions given in the
“STARTING UP” paragraph.
WARNING!
Always unplug the iron from the outlet before filling the boiler with
water.
WHEN YOU HAVE FINISHED IRONING
• Press button (16) on the iron, until no more steam is being produced.
• Turn the appliance off by pressing the proper push button (3).
• Unplug the appliance from the outlet.
• Rest the iron on the support base (7) and wait for the appliance to
completely cool down before carrying out any operations.
WARNING!
Never unscrew the cap (9) without emptying out all the steam from the
boiler.