Operation Manual

 ENGLISH
• Rest the appliance on a firm flat surface.
• Place the iron on the boiler support base (14).
• Select the right temperature by turning the control knob (20) on the
iron (figure 1).
• Completely unwind the power cord by drawing it out from its storage
(12) and plug into the outlet.
• Press the push button (3) to turn the iron on.
• The iron is ready to be used when the indicator light (21) goes out.
• The indicator light (21) on the iron will go on and out automatically
while you are ironing to show that the soleplate is being kept at a
constant temperature.
• When you have finished ironing, press the push button (3) to turn the
appliance off. Let the iron cool down.
FOR DRY IRONING
Fig.2
11
12
Fig.3
13
10
1
AFTER USE
Before putting the
appliance away,
press the push
button (11) to
automatically wind
the power cord in
its storage (12)
(see figure 2).
During this op-
eration, it is rec-
ommended guiding the power cord while it is wound.
Also wind the iron-boiler connecting tube (10) in its storage (13)
around the boiler shell (1), as shown in figure 3.