Operation Manual

WARNING!
Always unplug the iron from the outlet before filling the boiler with
water.
WHEN YOU HAVE FINISHED IRONING
• Turn the selector (2) to the position;
• Press button (16) on the iron, until the boiler is completely empty
and no more steam is being produced;
• Turn the selector (2) to position to turn off the appliance.
• Unplug the appliance from the outlet;
• Rest the iron on the support base (6) and wait for the appliance to
completely cool down before putting it away.
NO MORE WATER WHILE IT IS BEING USED
• The jet of steam becomes less and finally disappears if there is no
more water. The “water end” indicator light (3) goes on.
• Carefully follow the instructions given below to fill up the boiler
again:
- turn the selector (2) to the position;
- press button (16) on the iron, until the boiler is completely empty and
no more steam is being produced;
- turn the selector (2) to position to turn off the appliance;
- unplug the appliance from the outlet;
- slowly unscrew the boiler cap being careful of any eventual residual
steam;
- fill up the boiler following instructions given in the “HOW TO FILL
THE BOILER WITH WATER” paragraph;
- switch on the appliance again following the same instructions given
in the “STARTING UP” paragraph.
 ENGLISH