Operation Manual

IRONING
• Press button (16) on the iron for the steam jet: the steam will stop
coming out when you release the button.
• To use the continuos steam function, press the steam button (16)
and at the same time slide the cursor (16a) towards the cork handle.
To turn this function off, slide the cursor (16a) in the opposite
direction to the handle.
• With the iron held upright at a distance of 20 cm you can use the jet
of steam to smooth out creases and freshen up clothes while they
are hanging. Avoid using on any wore garment as the steam is
extremely hot and it is possible to get burned.
• Before ironing delicate fabrics it is best to make trial run on a
hidden piece e.g. the hem.
• We advise you to iron materials needing low temperatures first
then go on to more resistant materials, needing higher
temperatures.
WARNING!
Some drops of water may leak out of the iron soleplate (12) when the
jet of steam starts coming out; this is quite normal and is due to
condensation forming inside the iron-boiler connecting tube (8).
This will disappear with the following jet of steam. It is therefore not
recommended to point the first jet of steam directly onto the item to be
ironed.
The iron must be used and left at rest on a firm surface.
WARNING!
Never unscrew the boiler cap (5) while the appliance is working but
wait for the appliance to completely cool down before opening it.
Do not use the appliance if it has been accidentally dropped, if there
are signs of damage or if it leaks water.
Never leave the appliance unattended with the plug in the outlet when
you are ironing.
rature and the pressure in the boiler respectively are constantly
under control.
• Rest the iron on the boiler support base (6) during ironing pauses.