Operation Manual

 ENGLISH
• This function allows moistening the linen during both steam and dry
ironing.
• To enable it press the spray button (5) several times and direct the
water jet onto the most resistant creases.
SPRAY FUNCTION
• Set the steam control dial (4) to the “0” position (dry ironing).
SUPER-STEAM FUNCTION
To enable this function, press the super-steam button (4)
several times: the iron will supply an instantaneous high-
power steam jet.
• Do not press button (4) too many times consecutively, as this may
cause non-steamed water drops to be discharged.
• Use this function only with the temperature control knob (9) set to
symbols , MAX.
• When the super-steam function is used for the first time some
limestone pieces could come out. We therefore recommend not to
discharge the first steam jets directly onto the linen.
NOTE
• Steam is delivered only if knob (9) was set to symbols , MAX.
• When the iron is placed vertically during ironing pauses, the steam
delivery is automatically cut off.
• Some water drops can come out together with steam on first use.
This is to be considered normal. Before ironing your linen carry out
some tests on an old cloth.
ANTI-DRIP SYSTEM
This system prevents the iron from dripping onto the linen.
The device is automatically enabled if, for whatever reason,
the temperature of the soleplate lowers.
DRY IRONING