Operation Manual

 ENGLISH

PUTTING INTO OPERATION

• Make sure the steam control dial (4) is in the “0” position (dry

ironing).

• Completely unroll the power cord (8), put the

iron in a vertical position and connect the plug

to the power outlet.

• With the temperature control knob (9) select

the temperature which is most suitable for the

type of fabric to be ironed.

• The thermostat light (10) turns on and will then

turn off when the soleplate reaches the selected

temperature. The iron is now ready for use.

IMPORTANT

• Before and during use make sure the work surface is stable and

heat resistant.

• Never leave the iron unattended when it is connected to the power

supply.

• Do not use the iron if it has been dropped, if there are signs of

damage or in case of water leaks.

SUGGESTIONS

• First iron more delicate fabrics, which require low temperature, and

then the more resistant ones, which require higher temperatures.

• Before ironing pass the iron over a small hidden area of your item of

linen to make sure the temperature selected is suitable for that type

of fabric.

STEAM IRONING

• Fill the tank with water.

• Choose the desired steam output by turning the steam control dial

(4).

SUGGESTION

If water in your area is particularly calcareous, it is advisable to use

distilled water.

Fig.2