Operation Manual

 ENGLISH
12
Fig.4
Fig.5
13
11
11
ACCESSORY FITTING
WARNING!
Before fitting or changing an accessory, make sure the appliance is
unplugged from the power socket and wait util the steam nozzle (11) is
completely cold.
Long brush to clean carpets, curtains, car
upholsteries, etc.
• Fit the long brush (12) into the steam nozzle
(11) firmly.
• Wipe the surface to be cleaned with brush
(12).
Round brushes to clean obstinate dirt in
tight angles
• Fit the round brush (13) into the steam
nozzle (11) firmly.
• Wipe the surface to be cleaned with brush
(13).
USE PRECAUTIONS
• Before switching on the appliance, always check that the material or
the surface to be cleaned are suitable for a steam treatment of high
temperature: before using the appliance, test it on a small area.
• Do not stay on the same area too much time since steam may damage
the material or the surface which is being cleaned.
• Shiny plastic material may change in opaque due to the steam.
• Acrylic material, velvet and linen are very sensitive to steam.
• Painted wood and leather may discolour with steam.
• Do not use the appliance on uncoated floors.
• Do not use the appliance on waxed floors.
WARNINGS
• During use never place the appliance on one of its sides and never
direct the steam towards people, animals, plants.
• Do not use the appliance near baths, sinks or water containers.
• At the end of the use, empty the tank so that the remaining water
does not deposit limestone inside the appliance.
• To avoid the pump to be dry, fill the tank with water (3) constantly.