Operation Manual

 ENGLISH
TANK FILLING
• Put the appliance on a flat and stable
surface.
• Turn cap (5) to the “open padlock”
position, then remove it.
• Fill tank (3) with water without
exceeding the MAX level using funnel
(15) and measuring cup (16).
• After filling tank (3), put cap (5) and
turn it to the “closed padlock” position.
NOTE: Use distilled water if water in your area is particularly calcareous
so as to prevent limestone scaling inside the tank.
WARNING!
When filling the tank, make sure the appliance is unplugged from the
power socket.
Do not add more than 400 ml of water which is the maximum capacity.
Do not add detergents, chemical additives or water softeners since
they may damage the appliance and invalidate the warranty.
5
Fig.2
11
9
3
15
Fig.1
ASSEMBLY OF THE STEAM NOZZLE
• Insert the steam nozzle (11) into
hole (9) as shown in figure 2.
• Turn the steam nozzle (11)
clockwise to fix it to the
appliance.
NOTE: This nozzle can be used
to clean angles, shutters, toilets,
taps, etc.
USE INSTRUCTIONS