Operation Manual

40 |
 ENGLISH
Zipper application
Machine setting
Pin or baste zipper tape to fabric and place it under the foot.
Smooth the threads toward the back and lower the foot.
To sew left side of the zipper, guide the edge of the zipper along the zipper teeth and stitch
through garment and zipper tape.
Turn the fabric and sew the other side of the zipper in the same way as you did on the left
side of the zipper.
Blind stitch hemming
Machine setting
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot
holder screw to place the hem guide
between the screw and the shank of foot
holder.
Tighten the screw making sure the wall of
hem guide is placed in the middle of the
toes of the presser foot.
Raise the presser foot and place the fabric
under the foot so that the soft fold rests
against the wall of hem guide.
Lower the foot, then stitch slowly for better
control so that the zigzag stitches fall on
the hem allowance and pierce the soft fold.
While sewing, make sure the soft fold runs
along the wall of hem guide.
Spread the fabric flat with the right side
facing up.
manuale inventa 200 A4 24-07-2008 14:28 Pagina 40