Instruction Manual

ROLO

CENTRAL HEATING INSTALATION INSTRUCTIONS

Determine Correct Orientation for Installation

Removable sckers on the product will indicate

which way up you need to install, as follows:

- TOP if C/Heang - (Vercal Bar Orientaon)

- TOP if C/Heang - (Horizontal Bar)

In CENTRAL HEATING installaon you will require

the threaded plug found in the bracket box and an

8 mm Allen Key (not supplied). This threaded plug

will act as a ow diverter, forcing the ow of the water

up and over inside the radiator, to achieve even heat

distribuon of all bars.

Where to install the threaded plug

When the product is to be mounted portrait the threaded plug

will need to be screwed in on the FLOW side. When portrait you

can choose to have the ow on the le or right hand side.

IMAGE A: The plug is screwed in on the le

hand side, where the ow is coming in.

HOT COLD

HOTCOLD

PAGE 1
A ROLO CENTRAL HEATING INSTALATION INSTRUCTIONS Determine Correct Orientation for Installation Removable stickers on the product will indicate which way up you need to install, as follows: - TOP if C/Heating - (Vertical Bar Orientation) - TOP if C/Heating - (Horizontal Bar) HOT In CENTRAL HEATING installation you will require the threaded plug found in the bracket box and an 8 mm Allen Key (not supplied).
PAGE 2
ROLO B CENTRAL HEATING INSTALATION INSTRUCTIONS Where to install the threaded plug When the product is to be mounted landscape the threaded plug needs to be screwed into the left hand side of the radiator. IMAGE B: This will force the water efficiently around the radiator whether the flow is coming from the left or the right hand side.