User Guide

14
V.1.0.R1.2022
5. FUNCTIONAL TESTS BEFORE COMMISSIONING THE DEVICE
Before putting the device into use, check the following functionalities to confirm the safety of users and
correct installation:
- stability of the device mounting on the foundation,
- smooth slide of the element.
6. MAINTENANCE, INSPECTION, REPAIRS
It is recommended to keep a book of inspections of devices in accordance with PN-EN 1176 standard.
It is recommended to use the following types of inspections, to eliminate the potential risks for users and
determine the need for service or maintenance:
- Routine visual inspection carried out every 1-7 days. Its purpose is to identify hazards that may
result from normal use, acts of vandalism or weather conditions. Pay attention to the cleanliness of
the surface around the Inclusive Tracking Play Panel and the access ramps (glass, stones,
packaging, etc.).
- Functional inspection carried out every 3 months. It refers to verify the correct operation of the
device in terms of functionality. A functional inspection is a more detailed inspection than a routine
inspection, checking the operation (functionality) and stability of the device in detail, mainly in terms
of its wear.
Check:
- the quality of the varnish coating,
- no play in setting in the ground,
- smooth slide of the element.
The condition of the smoothed surfaces should also be checked, as well as any protruding, sharp
elements, edges, protruding screws. The assessment also covers the degree of strength of the entire
structure and the unavailability of the edges or surfaces of the foundations to the user.
- Annual main inspection carried out to establish the general condition of the equipment in relation to
the safety level. It is recommended to pay special attention to factory-sealed (non-dismountable)
parts. Annual inspection may require disassembly of the device and sending to Manufacturer for
service.