User Guide

10
V.1.0.R1.2022
1. Placing the foundations and drilling holes for the pins
Tools:
Hammer drill with a drill fi 12 min drilling length 140mm
Chemical anchor Fischer FIS VL 410 C or Tytan EVOLUTION II or other with similar properties
17mm spanner / socket wrench
Loctite 243 adhesive
If a concrete screed has been made, the concrete has set and is ready for further work, place the frame
on the concrete and make holes for the anchors in appropriate places. According to the manufacturer
Fischer FIS VL 410 C, a diameter of fi 12 is required for the M10 pin.
No
Component
Quantity
[pcs.]
Figure
1
Main construction
1
2
Foundation block
(optionally)
1
3
Foundation pin
M10x300
4
4
Nut M10
DIN EN ISO 4032
12