Operation and maintenance manual

Section 120-0010
25
SM 2124 Rev 3 8-03
12. Identify, tag and disconnect hydraulic lines at
transmission differential lock cylinder. Cap lines and
ports to prevent entry of dirt.
13. Identify, tag and disconnect transmission oil cooler
lines from the transmission retarder valve. Cap lines
and ports to prevent entry of dirt.
14. Identify and tag oil filter hose assemblies (2, 3 &
26, Fig. 9) to aid installation. Disconnect hose
assemblies (2, 3 & 26, Fig. 9) and cap open ends and
adaptor (1, Fig. 9) and elbows (4, 11 & 27, Fig. 9) to
prevent entry of dirt.
15. Identify and tag diagnostic hose assemblies (6, 7 &
8, Fig. 9) to aid in installation. Disconnect hose
assemblies (6, 7 & 8, Fig. 9) and cap open ends and
elbow (5, Fig. 9) and adaptors (10 & 26, Fig. 9) to
prevent entry of dirt.
16. Identify, tag and disconnect all remaining lines and
fixtures necessary to allow removal of the transmission
from the vehicle.
17. Attach suitable lifting equipment to the lifting points
on transmission and raise lifting equipment to take up
the slack.
18. Remove locknut (5), hardened washer (14), bolt (6)
and snubbing washer (3) securing LH bracket (7) to
frame mounts.
19. Remove locknut (5), hardened washer (14), bolt (6)
and snubbing washer (3) securing RH bracket (13) to
frame mounts.
20. Remove locknuts (5), washers (4), snubbing
washers (3) and bolts (6) securing front bracket
assembly (1) to frame mounts.
1 - Adaptor
2 - Hose Assembly
3 - Hose Assembly
4 - Elbow
5 - Elbow
6 - Hose Assembly
7 - Hose Assembly
8 - Hose Assembly
9 - Dust Cap
10 - Adaptor
11 - Elbow
12 - Adaptor
13 - Adaptor
14 - Diagnostic Nipple
15 - Oil Filter Head
16 - Filter Cartridge
17 - Tee
18 - Adaptor
19 - Hose Assembly
20 - Elbow
21 - Adaptor
22 - Hose Assembly
23 - Adaptor
24 - Elbow
25 - Adaptor
26 - Hose Assembly
27 - Elbow
Fig. 9 - Transmission Oil Lines
SM - 2682
C
B
A
6
7
12
1
9
9
14
14
5
12
10
24
19
13
23
25
17
11
2021
22
8
4
15,16
1
10
4
TO SOL VALVE
PORT T
RETARDER
VALVE
2
3
27
26
18
Transmission - Transmission and Mounting