Operation and maintenance manual

Section 110-0030
Engine - Engine and Mounting
SM 2121 Rev 1 11-03
14
* * * *
to the maximum value.
Belts should be neither too tight nor too loose. Belts
that are too tight impose excess loads on the alternator
bearings, shortening both belt and bearing life. A loose
belt will slip and may cause damage to accessory
components.
SPECIAL TORQUE SPECIFICATIONS
TORQUE
FIG. NO. ITEM NO. ITEM NAME Nm lbf ft
1 10 Locknut 264 195
1 21 Bolt 150 110
1 26 Bolt 81 - 95 60 - 70
1 38 Bolt 81 - 95 60 - 70
1 41 Locknut 165 122
SPECIAL TOOLS
Refer to Section 300-0070, SERVICE TOOLS, for part
numbers of service tools which should be used in
conjunction with procedures outlined in the engine
manufacturers service manual, and, general service
tools required. These tools are available from your
dealer.