Operation and maintenance manual

Section 230-0040
SM 1913 Rev 2 10-03
1
BODY SYSTEM - Hydraulic Tank
SM - 2413
DESCRIPTION
Numbers in parentheses refer to Fig. 1.
The hydraulic tank can be identified as item 1 in
Section 230-0000, BODY SYSTEM SCHEMATIC.
The hydraulic tank (1) is the common reservoir for the
steering, braking and body hoist systems. It is
mounted off the frame and fender bracket (23) on
springs (16), at three points, at the rear right hand
side of the tractor.
Integral with hydraulic tank (1) assembly are filter
assembly (13), oil level sight gauge (11), strainer
(12) and access covers (4 & 10). Located on top of
the tank is filler cap (2), breather (8) and filter visual
indicator (29).
Fig. 1 - Exploded View of Hydraulic Tank and Mounting
1 - Hydraulic Tank
2 - Filler Cap
3 - Gasket
4 - Access Cover
5 - Bolt
6 - Lockwasher
7 - Gasket
8 - Breather
9 - Nipple
28 - Elbow - 90°
29 - Visual Indicator
30 - Washer
31 - Valve Assembly
32 - Element
*33 - Padlock
*34 - Key
* - Not Shown
10 - Access Cover
11 - Sight Gauge
12 - Strainer
13 - Filter Assembly
14 - Bolt
15 - Washer
16 - Spring
17 - Washer
18 - Locknut
19 - Bolt
20 - Washer
21 - Bolt
22 - Lockwasher
23 - Fender Bracket
24 - Cover Plate
25 - Wing Nut
26 - Rod
27 - Adaptor
8
7
4
9
5
6
12
14
15
16
17
18
23
22
21
31
30
1
2,3
24
29
28
27
5
6
10
7
25
26
13,32
19
11
20
16
17
18