Operation and maintenance manual

Section 165-0015

SM 2167 Rev 1 10-03

Brake Assembly - Oil Cooled Disc Brakes

SM - 3089

DISASSEMBLY

Numbers in parentheses refer to Fig. 1, unless

otherwise stated.

WARNINGS

To prevent personal injury and property

damage, be sure wheel blocks, blocking

materials and lifting equipment are properly

secured and of sufficient capacity to do the job

safely.

1. Remove caps (7) from adjusting screws (6) as

shown in Fig. 2.

2. Loosen the jam nuts (4) and remove the adjuster

screws (6).

Fig. 2 - Removing Caps

SM - 3090

Fig. 3 - Removing Adjusters

SM - 3091

Fig. 4 - Removing Jam Nuts

3. Remove the jam nuts (4) from the adjuster screws

(6), and remove the seals from the jam nuts (4) and

nuts (2).

SM - 3092

Fig. 5 - Removing Plugs

4. Remove the puller screw plugs (12) and bleeder

screw (14).