Operation and maintenance manual

4-10

COLD FILL LEVEL

MINIMUM -

ENGINE OFF

HOT

LEVEL

BAND -

ENGINE

RUNNING

COLD FILL

LEVEL

MINIMUM -

ENGINE

RUNNING

MAX

152mm

(6") Min

MIN

Pre-Operating Checks

Make sure all cab glass, mirrors and lights are clean. Test all controls to ensure

they are functioning properly. Move transmission gear shift control momentarily to

'REVERSE' to make sure the reverse alarm sounds.

1. Transmission - Hot Oil Level - Apply the parking brake, select neutral gear and

start the engine. Allow vehicle to idle in neutral for approximately 20 seconds.

Transmission oil gauge on the dash should show a steady reading. With parking

brake applied, foot on service brake and engine idling, select each gear position in

turn. Allow vehicle to remain in each gear for 5 - 10 seconds. Return gear selector

to neutral and with engine idling, check the oil level. Oil level should be up to, but not

over, the upper mark on the dipstick.

1572