Operation and maintenance manual

4-5

472

7. Hydraulic Tank - Oil Level Check - Operate the body hoist cylinders to their

fully-extended positions to charge cylinders and lines then lower the body. With

the engine off, the sight gauge should show half full. Add oil if low.

8. Fuel Level - Check fuel level gauge. Tank should be filled at end of each shift.

9. Seat and Seat Belts - Adjust the seat position and lap belt, as required, to

allow complete machine control at all times with minimum fatigue. Make sure the

seat belt does not restrict movement for proper machine operation.

1471

RPM x100

OIL

TEMP

TRANS

150

120

140

1473