Operation and maintenance manual
4-2
OPERATING THE TRUCK
Pre-Starting Inspection
* Before the engine is started ensure
the vehicle is ready for operation.
* The vehicle should be in a level
position to permit accurate checking
of fluid quantities in the engine and
other components.
* Make sure parking brake is set and
block wheels to prevent accidental
movement of the vehicle while
checking component levels.
* Test all lights and horn for proper
operation.
* Walk around the vehicle and carry
out the Inspections and Component
Checks described in the drawing
opposite and on the following pages.
1464
ENGINE
Check oil level.
Check for leaks
RADIATOR TOP TANK
Check coolant level.
Check for leaks
BRAKE COOLANT TANK (TA40 only)
Check oil level.
Check for leaks
WHEEL PLANETARIES
Check for leaks.
WHEEL PLANETARIES
Check for leaks.
WIRE ROPES
Check for debris and damage.
BRAKE ACCUMULATORS
Check for leaks.
STEERING CYLINDERS
Check for debris, leaks
and damage. Check hoses
for wear and leaks.
OPERATORS COMPARTMENT
AND STEPS
Check for cleanliness.
Check seat belts.
SHOCK ABSORBERS
Check for debris, leaks and
damage.
WHEELS AND TYRES
Check condition, inflation,
wheel nuts and for
damaged rims.
WHEELS AND TYRES
Check condition, inflation,
wheel nuts and for
damaged rims.
TRANSMISSION
Check oil level.
Check for leaks.
Check indicator.
HYDRAULIC TANK
Check oil level.
Check for leaks.
BODY CYLINDERS
Check for debris, leaks
and damage. Check hoses
for wear and leaks.
INTERLEAF MOUNTINGS
Check for damage.
SUSPENSION LINKS
Check for damage.
DIFFERENTIAL
Check for leaks.
SUSPENSION UNITS
Check for debris and damage.
DIFFERENTIAL
Check for leaks.