Operation and maintenance manual

3-14
Operator's Seat - Operation
To achieve the most comfortable driving position, adjust the seat as follows;
1. Sit in seat.
2. Pull up and release height and weight adjustment (1) handle - this will reset
the seat to the predetermined height setting - 'bounce' lightly until a 'click' is
heard, the seat position in now engaged properly.
3. Pull up horizontal adjustment handle (2) and move seat forwards or
backwards, release handle when required position is achieved.
4. Pull up (or push down) height and weight adjustment (1) handle and hold until
the require height position is achieved, release handle - 'bounce' lightly until a
'click' is heard, the seat position in now engaged properly.
5. Pull up handle (5) and adjust backrest to the required angle (5), release
handle when required position is achieved.
6. Pull up (or push down) backrest (6) to the required height.
7. Set damper adjustment (7) position to suit driving conditions, (4 positions;
forward position - hardest setting, rearmost position - softest setting).
8. Set fore/aft isolator (3) position to suit driving conditions, (forward position -
unlocked, rearmost position - locked).
9. Engage seat belt (4).