Operation and maintenance manual

3-13
Operator's Seat - Air Suspension (Grammer)
The air seat only reacts when the driver sits on the seat.
When unoccupied, the seat sinks to the lowest position to
allow easier access.
The following is the list of controls to adjust the seat:
1. Height and weight adjustment.
2. Horizontal adjustment (sliderails).
3. Fore/aft isolator (forward position - unlocked, rearmost
position - locked).
4. Seat belt.
5. Backrest angle adjustment.
6. Backrest height adjustment.
7. Damper adjustment (4 positions; forward position -
hardest setting, rearmost position - softest setting).
WARNING
Do not attempt to adjust seat or seat belt
while machine is moving. Loss of control may
result. Stop machine; apply brakes; then adjust.
1342
1
7
2
3
4
5
6
WARNING
The cab is for protection of the operator and
adheres to the mandatory standard for Roll Over
Protection Structure (ROPS).
A prerequisite for protection is that the operator
remain in the cab, with the seat belt securely
fastened. Should the vehicle begin to roll, hold onto
the steering wheel.