Operation and maintenance manual

2-2
SAFETY PRECAUTIONS
General
* Read this Operator’s Handbook and learn the operating characteristics and
limitations of the vehicle. Know what operating clearances the vehicle
requires.
* Read the CIMA Safety Manual and follow the recommended safety
precautions.
* Know clearances of all side and overhead obstructions such as wires,
bridges, etc., for operating safely.
* Always know all traffic rules, signs, flags and hand signals used on the job
and know who has the responsibility for signalling.
* Be aware of operating hazards that weather changes can create on the job.
Know proper procedures to follow when a severe rain or electrical storm
strikes.
* Never attempt to operate or work on a machine when not feeling physically fit.
* Know what safety equipment is required and use it. Such equipment may be:
Hard hat, safety glasses, reflector type vests, respirators, ear plugs etc..
* Never wear loose clothing, rings, watches etc., that might catch levers and
controls and cause loss of control.
* Keep hands and controls free from water, grease and mud to assure nonslip
control.
* Handle fuels and lubricants carefully and clean up spills to avoid fire and
slipping hazards.