Operation and maintenance manual

8-12
EVERY 2 000 HOURS
Drivelines - Visually check Low Maintenance drivelines for leaking or
damaged seals.
Note: Low Maintenance drivelines can be identified by having plugs fitted to
the spiders, not grease nipples.
Axles (TA40) - Drain lubricant and refill to level plugs.
Note: When refilling centre axle ensure that 3rd differential unit is primed with
1 litre (1.75 UK pints) of oil before filling drive head.
Hydraulic Oil Tank - Drain oil, remove and clean suction screens and
strainers. Reinstall suction screens and strainers and refill hydraulic oil tank.
ENGINES AND TRANSMISSIONS
All information contained in the 'Lubrication and Service Chart' was extracted
from the relevant manufacturers Operators Manual and was correct at time of
publication. User should ensure that information contained in this chart,
regarding Engines and Transmissions, reflects the information shown in the
relevant manufacturers Operators Manuals supplied with the vehicle.
Maintenance procedures should be carried out in conjunction with any
additional procedures contained in the relevant manufacturers 'Operation and
Maintenance Manual', at the intervals specified.