Operation and maintenance manual

8-5
LUBRICATION AND SERVICE CHART
Interval Ref. No. of Service
Hours Points Identification Service Instructions Points Lubricant Quantities
1 Engine Check oil level. Add if low. 1 EO As required
2 Transmission Check oil level. Add if low. 1 EO As required. See Note 3
3 Hydraulic Tank Check oil level. Add if low. 1 HO As required
38 Brake Coolant Tank (TA40 only) Check oil level. Add if low 1 HTO As required
4 Hydraulic Oil Filter Indicator Check. Replace element if required. 1
6 Radiator Top Tank Check coolant level. Add if low. 1
8 Fuel Tank Check fuel level. Add if low. 1 As required
10 - Fuel Lines Check for leaks.
- Turbocharger Check for leaks.
- Hydraulic Systems Check for proper operation.
9 Air Filter Restriction Gauge Check. Replace element if required. 1
- Air Cleaner Vacuator Valve Check for proper operation. 1
- Tyres Check condition and pressure. 6 Refer to Page 3
- Transmission Oil Gauge Check temperature readings.
- General Check for debris, leaks and damage.
28 Oscillation Bushes Lube. 2 EP, NLGI See Note 1
12 Suspension Beam Lube. 6 EP, NLGI See Note 1
and Panhard Bushings
13 Body Hinge Pins Lube. 2 EP, NLGI See Note 1
14 Wheel Rim Nuts (TA40) Check torque. 138 540 Nm (400 lb ft)
14 Wheel Rim Nuts (TA35) Check torque. 138 730 Nm (540 lb ft)
50 15 Cab Ventilation Filter Inspect and clean if required.
18 Drive Belts Check tension. Adjust if required. See Engine Manual
- Battery Electrolyte Check level. Add if low. 2 As Required.
150 - Engine Air Cleaner Check. Clean inlet screen. 1 - -
1 Engine Drain oil and refill. 1 EO See Page 13
7 Radiator Clean and inspect radiator fins. 1 See Note 6
8 Fuel Tank Drain water and sediment from tank. 1 - -
10 Steering Cylinder Pins Lube. 4 EP, NLGI See Note 1
250 11 Body Cylinder Pins Lube. 4 EP, NLGI See Note 1
17 Engine Oil Filters Replace. 3 EO See Page 13
- Transmission Breather Clean if required. 1 - -
19 Wheel Planetaries Check oil level. Add if low. 6 EPL As required