Operation and maintenance manual

8-2
SAFETY PRECAUTIONS
Do not allow unauthorized personnel to service or maintain this machine. Study
the Operator’s Handbook and Maintenance Manual before starting, operating
or servicing this machine. Always follow procedures and safety precautions
detailed in the Maintenance Manual.
Always attach a 'DO NOT OPERATE' or similar warning sign to ignition switch or
a control before cleaning, lubricating or servicing the machine.
Never allow anyone to work on the machine while it is moving. Make sure no
one is on the machine before working on it.
Do not work under or near unblocked or unsupported body. Always use the
body safety prop. Body prop must only be used when the body is empty.
Do not work under or near any unblocked or unsupported linkage, part or
machine.
Always shut down machine according to the procedure under 'Stopping The
Engine', described on page 4-15. Turn off the master switch before cleaning,
lubricating or servicing the machine except as called for in this Handbook or
Maintenance Manual.
Always install steering lock bar before adjusting or servicing the machine with the
engine running. Refer to 'General' safety section on page 2-2.
Always relieve pressure before servicing any pressurized system. Follow the
procedures and safety precautions detailed in the relevant Maintenance Manual
section.
When changing oil in the engine, transmission and hydraulic systems, or
removing hydraulic lines, remember that the oil may be hot and can cause burns
to unprotected skin.
When working on or around exhaust components, remember that the
components may be hot and can cause burns to unprotected skin.