User Manual
18
OPERATING INSTRUCTIONS
2) Loosen the rotational lock and rotate the tower into its nesting position. The upper tele-
scoping winch should be pointing forward, towards the tongue.
3) Remove the travel locking pin (located on cradle).
4) Remove the tower locking pin (located on tower base).
5) Using the lower pivot winch, lower the tower into the cradle.
6) Verify that the tailhook is “latched” or hooked over the tower cradle. This prevents the
tower sections from telescoping out while traveling.
7) Replace the travel locking pin.
8) If required, remove the light fixtures and crosshead assembly.
9) Secure all locking pins and verify that the tailhook is properly latched.
10) Close and lock both doors.
Travel Locking Pin
Telescoping
Upper Winch
Rotational Lock
Kick-out Spring
Pivot Lower
Winch
Coupler
Tower Locking
Pin
Outrigger
Jack