User Manual

11
Transport & Towing
1) Using the front leveling jack, securely attach the light tower to the transporting vehicle.
2) Insure that the coupler is properly secured to the towing vehicle and attach the safety
chains.
ALWAYS USE THE PROPER TRAILER HITCH AND
SAFETY CHAINS. OBEY ALL LOCAL OR STATE
D.O.T. LAWS WHEN TOWING A LIGHT TOWER.
FAILURE TO PROPERLY SECURE THE TRAILER
TO THE TOWING VEHICLE MAY RESULT IN SERI-
OUS INJURY OR DEATH.
3) Retract and rotate the front leveling jack into its stowed position.
4) Check the tires for proper inflation (32psi) and verify the lug nuts are tight.
5) Position all outriggers and jacks into the stowed or travel position.
6) Verify that the fixtures are secure and ready for transport.
7) Secure all loose locking pins and retainers.
8) Make sure all doors are closed and tightly locked.
9) Remove tire chocks.
Towing of a Terex light tower is approved with the
light fixtures in place on the crosshead assembly
for all off road terrain and highway towing as long
as the following speed limits are followed:
Highway towing- 45 MPH max
Off road towing- 10 MPH max
Severe damage may occur from excessive
speeds. Damage created by abuse will void the
manufacturer’s warranty.