User Manual

TeraHop Networks ICS User Training Manual (Preliminary)
August 2008 TeraHop Networks, Inc 32
How to Terminate the Incident and Shut Down the PDA
You must terminate an incident (thereby closing the TeraHop Incident
Command System program) before you can shut down the PDA.
How to Terminate the Incident and Release Assets from the Incident
When you terminate an incident, all assets are released automatically from the
scene.
You must terminate the incident before you can shut down the PDA completely.
Note: The Shut Down This PDA button is not used at this time.
To terminate an incident, do the following:
1. Tap Exit.
The Exit screen appears.
2. If you are using a view-only PDA (you aren’t the IC), just tap Shut
Down This PDA.