User Manual

IMS Installation Process Overview
7
4.0 IMS Installation Process
4.1 Overview
The following describes the process to install the IMS. Instructions for completing each
step in the process are described in the IMS Implementation Notebook and/or the IMS
Installation and Operation Manual.
The system is manufactured with the current firmware and software versions and default
First Responder settings.
The default Customer ID is installed by the manufacturer into the Message Management
and Routing (MMR) System.
The Area ID (AID) is installed by the manufacturer into the Gateway Server (GS).
The system is shipped to the Channel Partner and includes:
• Gateway Router (GR)
• Gateway Server (GS)
• Personal Data Assistants (PDAs)
• Remote Sensor Nodes (RSNs) (in deep sleep mode)
• Message Management and Routing (MMR) System
• Ethernet switch
• Mobile Gateway Cable Installation Kit
• Administration Station (ADMS) laptop computer with TeraHop Console
(THC) software, TeraHop Data Transfer (TDX) software, IMS Application
Configuration Tool (ACT) software, RSN Configuration Viewer (RCV)
software, and RSN Configuration Tool (RCT software. User guides for these
tools are available for download from the TeraHop Networks Customer
Relationship Management (CRM) System. For more information, contact
TeraHop Networks Customer Service via e-mail
or by calling 770-663-3455.
The installer provides the following:
• Crimp connectors
• Barrier strips
• Mounting kits
• Crimps
• High-power on/off switch
• Mounting materials