User Manual

Use of This Manual
3
2.0 Use of This Manual
This manual contains the information necessary to support installation and operation
activities that are to be performed by THN Field Service Technicians and affiliated
Channel Partners (CPs). Specific procedures can be located in the Table of Contents,
which references a page number for each procedure contained in the manual.
In terms of field repair, the manual contains fault isolation procedures that reference
specific maintenance tasks. Execution of the recommended task will be followed by a
Performance Verification procedure. This procedure will verify that the unit has been
returned to a fully-operational state.
Conventions Used in This Manual
When using this manual, you will note that some words and terms are in bold. Items that
are in bold are items that you enter, select, or click on a screen. Other important terms
and cautions are also in bold. For example:
To configure sectors/divisions, do the following:
1. Click the Sectors/Divisions icon.
The Sector Division List screen appears displaying the rows and columns for
data to enter for each record in the sector/division database. The application
table shown below is pre-populated with default values. These defaults can be
used, edited, or deleted using this table.
Messages that appear on the screen are in italics. For example:
To delete a record, select the record and click the Delete icon. The following message
appears: Are you sure you want to delete xxx?
Unless specified otherwise, all references or links to other topics direct the reader to
topics within this manual.
Unless specified otherwise, when instructed to click an item on a screen, for right-handed
mouse users, it is a single left-click on the mouse.