User Manual

Figure 4 - Front-panel mounting (left image); back-panel mounting (right images)
2.3. Mounting solutions
When choosing a place for mounting the TeraRanger Evo Swipe Plus, please consider            
the following recommendations:

● Mounting close to sources of heat or strong electromagnetic fields can decrease           
sensor performance
● Do not mount anything directly in front of the sensor or in a cone of              
approximately +/-35° around the central optical axis of the sensor
● It is advisable to avoid having other sources of Continuous Wave or modulated            
Infrared light sources near the sensor
● Please consider that dust, dirt and condensation can affect sensor performance
● It is not advised to add an additional cover in front of the sensor

During assembly and integration, please observe all common ESD precautions. All          
optical surfaces (sensor front) should be kept clean and free from contact with            
chemicals.
Copyright © Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)

9/29