User Manual


Figure 3 - TeraRanger Evo Swipe Plus external dimensions, USB backboard


The USB Backboard includes two holes for mounting the sensor using standard M2            
screws. The following methods can be used to mount the TeraRanger Evo Swipe Plus             
sensor:

1- Front-panel mount using the M2 screws
2- Back-panel mount using the 2mm ledge on the front side of the sensor

Figure 4 illustrates the two different mount methods. The first solution allows for easy             
surface attachment and rapid evaluation of the sensor. The second provides a more            
discreet installation and supports design-in projects by installing the sensor behind a           
surface (e.g panel), ideally with 2mm thickness.
Copyright © Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)

8/29