User Manual
Figure 9: Sensor orientation for People Counting Mode
The detection range of this mode can be adjusted from a minimum of 0.3 m to a
maximum of 1.7 m. To detect a person passing the set detection range has to be
breached.
5.1.2. Presence Detection Mode
In Presence Detection Mode, the sensor counts people passing by in front of the Evo
Swipe Plus, regardless of their direction. A presence is detected when a person is
standing at a set range for a set time. The sensor registers that a person has left when
their distance from the sensor is equal to or above the maximum range for the specified
amount of time
The output of the sensor is:
● A character string reporting that a person enters or leaves the field of detection
of the sensor
● A meter counting the number of people detected
The time threshold of this detection mode can be adjusted from a minimum of 0,1
second to a maximum of 3 seconds.
The detection range of this mode can be adjusted from a minimum of 0.2 m to a
maximum of 3.0 m, the default range being 2.5 m.
Note: The “Bidirectional People Traffic Detection Mode” and “Presence Detection
Mode” are exclusive. Please refer to section 5.3 “Graphical User Interface (GUI)” to read
how to switch between the 2 modes.
5.1.3. Engagement Trigger Mode
In Engagement Trigger Mode, the sensor raises a flag when a person is identified as
engaged, meaning standing at a set range for a set time. When this situation occurs, the
Copyright © Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
17/29