User Manual

4.3. Electrical characteristics
Table 9 - TeraRanger Evo Swipe Plus  power consumption


Parameter
Minimum
Maximum
Average
Power supply
Voltage input (V)
Current consumption (mA)

4.5V
25mA

5.5V
75mA

5V
50mA
Interface logic levels
(referenced to +3V3)
LOW
HIGH


-
2.3


1
-


-
-
5. USB/UART Normal Operation
5.1. Operating Modes of the TeraRanger Evo Swipe Plus
sensor
The TeraRanger Evo Swipe Plus features 4 modes:
● Bidirectional PeopleTraffic Detection Mode
● Presence Detection Mode
● Engagement Trigger Mode
● Gesture Recognition Mode (includes Swipe and Validation sub-modes) 

5.1.1. Bidirectional People Traffic Detection Mode
In Bidirectional People Traffic Detection Mode, the sensor counts people passing in           
front of the TeraRanger Evo Swipe Plus.

The output of the sensor is:
● A meter counting the number of people passing by, from left to right
● A meter counting the number of people passing by, from right to left

The sensor should be installed with the USB/UART Connector on the right side as shown              
in figure 9.
Copyright © Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)

16/29